Study & Reconstruction: Regimental Coat (2nd ‘Queens Own’ Centre Coy.) c.1808

15
Perhaps the most common garment to be found in Napoleonic reenactment, the regimental suit forms the iconic image that comes to mind when one thinks of the typical British redcoat soldier. Numerous small variances can be identified in the coat: when comparing the annual clothing issues, the contract manufacturer, and of course the particular regiments and companies of the Army.

27657908_1840661856006048_6729478208926906902_nThis coat was commissioned for a seasoned reenactor in the ‘2nd Queens Regiment of Foot’ Re-Enactment Group – his previous regimental coat had seen several seasons of hard service and was finally retired last Summer after the arduous recreation of the Siege of Ciudad Rodrigo on the exact site of the storming, 105 years ago.

My client portrays a corporal in the Centre-Company of the 2nd Regiment during the Peninsular Wars, specifically their group aims to represent each company of the regiment exactly how they would have appeared at the time of the British army’s landing at Mondego Bay on the 1st August 1808 – the first action of the first Peninsular campaign. With these specifications I was able to examine the Clothing Regulations as laid out in the Buckmaster, Perse and Hawkes tailor’s records, along with Ben Townsend’s invaluable research on 1803 Clothing and Draft Warrants.

As standard practice, the clothing of a Corporal in this regiment is no different to the clothing of Private soldiers, with the exception of Corporal’s Stripes to denote rank – two chevrons of regimental lace, sewn to facing cloth and worn on each arm.
No mentions were found which might suggest the regiment’s sealed pattern in 1808 had changed from the sealed pattern in 1805 so I was able to draft the coat in accordance with James Kochan’s work on the 1805 issue ‘jacket’. Charles Hamilton Smith’s illustrations of the 1814 uniform regulations would suggest the 2nd Regiment had adopted the newer pattern coat shortly after the 1st Peninsular Campaign but since new clothing was issued only when a regiment returned home, it is likely that many peninsular veterans spent three or more years wearing the same uniform without replacement.
The buttons and lace of a coat is unique to each regiment; the 2nd Regiment wore pewter buttons with the number ‘2’ raised in the centre; and their regimental lace was a white tape of worsted herringbone with a thick blue line along the outer edge. Fortunately for me, the group had been able to reproduce buttons from original examples in their members’ private collections and they had provided me with sufficient quantity of the regimental lace they wished for me to use.

 

Coats of the Centre Companies wore horizontal ‘slash’ pockets whereas flank companies (Light Infantry and Grenadiers) wore vertical ‘false’ pockets with openings in the pleat of the coat tails. The pocket lid was a regulated pattern and did not vary in size for smaller or larger coats – this would chiefly allow contractors to store hundreds of pre-cut pocket lids efficiently. The lids are first stotted over the right-side of the coat fronting before pressing along the fold line and prick-stitching along the outside of the lid with a dark-coloured cotton.

 

Before the insertion of the pocket bags, four loopings of regimental lace are applied to each pocket lid, at this time it’s also convenient to sew the lace on the turnbacks before the body is assembled and the garment becomes considerably more weighty. The pocket bags are shaped as a parallelogram to follow the shape of the cutaway turnbacks, their top seam allowance is folded outwards and pressed before setting and felling around the inside of the slash pocket opening.

 

The most most challenging task of the entire construction is the application of buttonhole lace on the coat’s frontings. Twenty loops; formed, pressed, positioned and applied entirely by hand – all the while ensuring that both fronts remain perfectly symmetrical. This task took longer than I care to remember but I recall it took slightly longer to apply the lace than all the other stages of construction combined. The epaulets were the final pieces to assemble, I expect these would have also been made en-masse to save the contractor’s time and money.

 

The cuffs were also stotted onto the raw-edge of the sleeve and folded back to create the facings. With the epaulets, I experimented here with a strip of worsted flat braid from Wyedean to recreate the Centre Company ‘tufts’. The result was not perfect but it was an idea we liked so Steven later made a jacket using four layers of braid instead of two and formed into a more compliant tuft shape with the aid the blunt side of a seam-ripper.

Finally the standing collar was attached according to the tried-&-tested method of fixing the collar lining from the back-seam to front and the collar facing from front to back with a prick stitch. The coat’s Serge lining was essentially cut to the same pattern as the body and felled around the inside of the coat.

 

While this was not the first regimental coat I had made, I regard it as the first reconstruction work I have completed using all my own research. Previous projects I had done, particularly with the 5/60th, were admittedly aided by research which had been collected and pored over long before I picked up the torch, however I endeavored to delve into our library of Regulation books personally for this project, and I am incredibly proud with the result.

Click here to visit the 2nd Queen’s Re-Enactment website

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s